3120i - HPHT CASING PACKER

Retrievable mechanical packer for high pressure and temperature conditions

APPLICATIONS

  • Drill stem testing
  • High pressure and temperature environments
  • Stimulations
  • Fracking
  • Acidizing and injection operations
  • Tubing-conveyed perforating

FEATURES

  • Right hand rotation to set
  • Straight pull to release
  • Hydraulic hold down slips engage during injection operations
  • Large bypass for circulating

The HPHT Packer is set by: picking up, rotating to the right, and setting down. Pressure below the packer forces the hydraulic hold-down buttons to engage against the casing, preventing the packer from being pumped up the well bore. Upward pull on the tubing will open the bypass and unset the packer.

SPECIFICATIONS

4-1/2” 5” 7” 9 5/8”
CONNECTION UP 2-7/8” PH-6 Box 2-7/8” PH-6 Box 3-1/2” PH-6 Box 3-1/2” PH-6 Box
CONNECTION DOWN 2-7/8” PH-6 Pin 2-7/8” PH-6 Pin 3-1/2” PH-6 Pin 3-1/2” PH-6 Pin
WORKING PRESSURE RATING 15,000 psi 15,000 psi 15,000 psi 15,000 psi
INTERNAL PRESSURE STRENGTH 21,000 psi 25,000 psi 23,400 psi 22,000 psi
OUTER PRESSURE STRENGTH 19,500 psi 22,000 psi 21,600 psi 20,900 psi
OUTSIDE DIAMETER 3.80” (11.6 – 13.5 Ib/ft)
3.92” (9.5 – 11.5 Ib/ft)
3.98” (2l lb/ft)
4.15” (18 lb/ft)
5.93”(29 lb/ft)
5.89”(32 lb/ft)
5.75” (35 lb/ft)
8.15” (53.5 – 58.4 lb/ft)
8.3” (47 lb/ft)
8.4” (43.5 lb/ft)
INTERNAL DIAMETER 1.5” 1.65” 2.25” 2.87"
TOTAL LENGTH 104” 114” 132” 145"
MAX TEMPERATURE 400 degF 400 degF 400 degF 400 degF
TENSILE STRENGTH (YIELD) 150,390 lbs 139,800 lbs 230,000 lbs 431,300 lbs
SERVICE SURROUNDINGS: Sour service above 175 degF as per NACE MR 0175

* Note: The most common sizes and specifications are depicted above. Other sizes are available upon request
* Premium Connections Available

Download Spec Sheet