Pump Through Flapper Valve


The Pump Through Flapper Valve (PTFV) is a single shot annular pressure operated flapper valve that provides a mean to control a well during cased hole DST operations.


  • The PTFV can be run as a safety valve providing a backup downhole valve to the Multi-Cycle Tester Valve.


The PTFV is run in-hole with a mandrel holding the flapper valve in the open position. Annular pressure is used to move the mandrel, allowing the flapper to act as a check valve.

The flapper will shut in the well while retaining the ability to pump through the valve down the tubing. Once the flapper valve has been released from the mandrel, it cannot be held open again.


O.D. 5.0"
I.D. 2.25"
Length 5.83'
Temperature -15°F to 350°F
[-26°C to 177°C]
Differential Pressure 10,000 psi
Differential Against Flapper 10,000 psi
Tensile Strength 300,000 lbs
Connections 3 ½ IF
Service H2S + CO2
Download Spec Sheet