Lower Packer Assembly


The Lower Packer Assembly is designed to serve four functions. Mounting of the rubber packer element. Delivery or removal of drilling mud to the packer elements during the test ination and deation process. Ination of packer elements to seal the bottom of the test interval. Equalization of hydrostatic pressure above and below the test interval. The rubber packer element is mounted to the bottom of the Lower Packer Assembly. The top end of the packer element is free to travel and is sealed by means of an O ring seal on a polished mandrel. Delivery (inate) and removal (deate) of drilling mud to and from the packer elements is facilitated by a ow passage that connects to the Release System and Upper Pacer Assembly. In order to maintain Equalization of hydrostatic pressure, a bypass pipe is connected above and below the testing zone via connection ports in the upper and lower packer assemblies.


5 1/16" 7" & 8"
O.D. 5" 7"
Fishing I.D. 1" 1.25"
Length 2.36m (7.74')" 2.36m (7.74')"
Pressure Rating 5,000 psi 5,000 psi
Temperature Rating -40°F to 250°F -40°F to 250°F
Tensile Strength 220,000 lbs 220,000 lbs
Connections 3½ IF 3½ IF
Service H2S + CO2 H2S + CO2
Download Spec Sheet